Matt circuit

Power supply with Z2C tubes are designed specifically to provide power supply voltage to the EL-34 tube amplifier push-pull in the previous article. Power supply with Z2C tube to tube power amplifier is made with a tube rectifier Z2C. Just as the power supply for power amplifier tube earlier, power supply also uses a filter 3 levels with kapsitor electrolyte. Circuit power supply with tube rectifier Z2C can give +210 VDC output voltage. A complete range of power supply for power amplifier tube can be seen in thethe following figure . Power Supply with tube Z2C on the rectifier tube in power supply with tube above require a supply voltage for the filaments taken from the other side of the transformer secondary. Power supply with Z2C tube is a power supply that dapt used as a substitute power supply for power amplifier tubes .

Tube Power Amplifier 35W Push Pull is made using a tube and eventually compiled configuration push-pull amplifier. Tube Power Amplifier 35W Push Pull tube til it using EL-34 as the amplifier end. In the power amplifier that is made with a tube at a glance looks simple because the use of active components that are not complex. It should be noted that the use of tubes in Tube Power Amplifier 35W Push Pull require a high voltage supply, therefore in the process of making and finishing must be careful of high voltage and radiation. Detailed series of Tube Power Amplifier 35W Push Pull can be seen in the following figure. Tube Power Amplifier Series 35W Push Pull Sign Components Tube Power Amplifier 35W Push Pull R1 = 470K 0.5 W R2-5 = 2K2 0.5W R3 = 150K 0.5W R4 = 220K 0.5W R6-10 = 56K 0.5W R7 = 3.9K 0.5W R8 = 220R 0.5W R9 = 1M 0.5W R11 = 39K 1W R12-23 = 180K 0.5W R13-21 = 820K 0.5W R14-22 = 5K6 0.5W R15-20 = 680K 0.5W R16-19 = 100K 0.5W R17-18 = 3K3 1W R24 = 470R 2W TR1-2 = 470R 1W Variabl...

Single Ended Valve Triode Amplifier has not same tone with Push Psu Amplifier. Over 90% of Amplifiers are push pull, and push pull amplifier does not 2nd harmonic and off course does not get 2nd 4th, 6th harmonic vs SE has 2nd, 4th, 6th harmonic. Push pull has minor distortion than SE Amplifier.2nd harmonic is make good tone for Music.not too much and not less than.feel good sound get from Single Ended Amplifiers with high efficiency speakers from 88dB/m to 100dB/m. I means Single Ended Amplifier is almost Single Ended Triode Amplifier.or Penthode but wired Triode. Tone is Different.good for Jazz and small room Classic.   KT88 Tube Power Amplifier Class A Circuit