Matt circuit

Schematic diagram of switching power supply for color television , which can used on a particular color TV, how it works using the switching transformer and switching transistors. At first voltage AC220V entry through the capacitor and resistor, and then immediately rectified AC voltage by 4 diodes and capacitor given on each diode. After a DC voltage then passes through a capacitor elco in parallel , and into the circuit and the voltage is lowered by the switching transformer. After the voltage is lowered and then was rectified and filtered again in the after circuit, the output voltage is set up on their own. For output +5V and +12V using ic stabilization 7805 and 7812. To use circuit switching power supply can be used on the same output voltage. If the circuit is working you should never ever touch the live area , because of the high-voltage section. And if the circuit has stopped working , do not forget to remove the voltage on the capacitor electrolyte, by linking the two legs to ...

DESIGN/SERVICE mode To enter the USER SERVICE mode Caution: The user service mode adjustment can be changed only when service personnel adjust the whole set data during servicing. As the control data have dramatic effects on functions and performance of the TV, service personnel should not tell user how to enter the SERVICE mode to avoid improper data settings. Set the volume to 0. Then press and hold the MUTE button on the remote control, and press the MENU button on the TV to enter the SERVICE mode. (In this case, the S mode cannot be stored in the EEPROM. To exit from the S mode, turn off the TV set.) After entering the S mode, Red“ S”is displayed on the upper center of the screen and MENU1 is default. Use the POS+/- buttons to highlight an adjustment and the VOL+/- buttons to adjust it. The adjusted data are immediately output and stored in the EEPROM. EX-1A1 chassis series are applied in 21NF55/21PF93 respectively which uses mainly Philips’ advanced UOC-ultimate chip TDA935X/6X/8X...